 Pipe Sections
Pipe Section is a precisely engineered Resin Bonded Fibrous Insulation to offer maximum resistance to heat passage. Fibers are spun from selected rocks, melted at 1600"C and blended to a carefully adjusted chemical composition.
Its centrifugally spun fibers have a diameter 1/2Oth that of human hair which are felted using State of the Art Technology into bonded and cured pipe sections to optimum density and resilience.
Why Use Preformed Pipe Sections
Mandrel wound and concentrically formed form fitting Pipe Sections, Precisely made to fit standard pipe diameters offer uniform maximum resistance to passage of heat along and around the entire 360 degrees of the pipe axis.
Superior density of this product enhances compression resistance in service. These sections are easy to fit and hence afford speedy application at site.
Specification Conformance
Pipe Sections are manufactured from select rocks using State of the Art Technology conform to local & International Standards such as, IS: 9842 BS:3958 Part-4 ASTM C 547-95
Technical Specifications
| Standard Densities |
144, 150 & 160 Kg/cu.m |
| Application Temperatures |
-100 °C to + 800 °C |
| Standard Thickness * |
25, 40, 50, 60, 65, 75 mm |
| Diameter Range ** |
12.5 mm to 350 mm Nominal Bore |
| Standard length |
0.5, 0.75, 1.0 mts. |
| * Other thickness from 20to 100mm In steps of 5mm can also be made available |
| ** Outer Diameter of Pipe to be specified |
Water And Moisture Repellency
Pipe Sections, by use of special additives and fiber lay pattern have an angle contact exceeding 90' which make it totally resistant to ingress of water wherever called for When tested as per IS, BS and ASTM standards the material exhibits excellent resistance to moisture as compared to materials like Calcium Silicate and Glasswool which are inherently hydroscopic in nature.
Insulation Materials loose their properties when water or moisture enters their body.
|
